Pump Engineering Helios Progressive Cavity Pumps

Hygienic and Industrial Progressive Cavity Pumps

Enquire now

Product Information

Pump Engineering Helios Progressive Cavity Pumps were previously marketed and sold as the Mono® Helios Progressive Cavity / Eccentric Screw pump and are readily available from Pump Engineering as are their spare parts.  All of which are the original genuine item.  They remain European Manufactured.

  • Hygienic and industrial PC / Screw pumps
  • Accurate and gentle positive displacement pumps
  • Clean-in-place versions available
  • Flow rates from 0-130 m3/hr at heads up to 24 Bar with full range of ATEX versions available
  • Designed for almost any fluid up to 800.000 cps. including abrasive liquids & suspensions with solids.
  • Available with feeding hopper, pre-feeding screw, vane crusher, Blade feeders with 2 pre-feeding screws

Typical Applications

  • High Solids content products and slurrys, food, beverage and industrial
  • Transfer in dairy, food, cosmetics, soft drinks and brewing industries
  • Volumetric Fillers
  • Barrel / Drum Emptying
  • Wax and fat transfer
  • This pump was re-badged as the Mono Helios ® and is now supported by Pump Engineering in the UK.
Helios® is a registered trade mark of Pump Engineering Limited
Mono® is a registered trademark of Mono® Pumps Ltd

Helios Progressive Cavity Series

Materials of construction: 316 Stainless Steel as standard,  also 304 Stainless Steel (and cast iron on some models)

Maximum Pressure: up to 240m (24 Bar)

Flow rate: 0 to 130 m3/h (0 to 130000 litres/hour)

Seal Options: Huge range to suit every duties, see options tab

Models: Large Comprehensive range – see catalogue in downloads section

End Connections: Din 11851, RJT, Triclamp, SMS, IDF/ISS, Flange and more

Motors:  IEC motors and IEC flanged or foot mount gearboxes fitted.

Other Names: Was also known as the Mono Helios ®, we now support this product whereas Mono no longer offer support.

 

Helios® is a registered trade mark of Pump Engineering Limited
Mono® is a registered trademark of Mono® Pumps Ltd

Additional information

Product Type

Wet End Material

H1CA